projets:backup2017:configserveur
Table des matières
Ceci est une ancienne révision du document !
Configuration serveurs
Configuration du Mutipathing
Debain / V7000 / Storwise Trouver les cartes Fibre Channe
# lspci | grep -i fibre 09:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03) 09:00.1 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
Modifier des sources.list pour intégrer non-free
deb http://httpredir.debian.org/debian stretch main **non-free** deb-src http://httpredir.debian.org/debian stretch main **non-free**
Installer les packages pour les cartes FC QLOGIC
root@:~# apt-get install qla-tools firmware-qlogic
Installer les packages de gestion des FileSystem
root@:~# apt-get libsysfs2 lsscsi sysfsutils
Installer le multipathing
root@:~# apt-get install multipath-tools
Redémarrer le serveur
Trouver la carte Fibre Channel et son port host
root@britt:~# systool -c fc_host -v | more
Class = "fc_host"
Class Device = "host0"
Class Device path = "/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/host0/fc_host/host0"
dev_loss_tmo = "30"
fabric_name = "0x5005076802e5f62d"
issue_lip = <store method only>
max_npiv_vports = "127"
node_name = "0x2000001b328787bc"
npiv_vports_inuse = "0"
port_id = "0xab0200"
port_name = "0x2100001b328787bc"
port_state = "Online"
port_type = "NPort (fabric via point-to-point)"
speed = "4 Gbit"
supported_classes = "Class 3"
supported_speeds = "1 Gbit, 2 Gbit, 4 Gbit"
symbolic_name = "QLE2462 FW:v8.03.00 DVR:v8.07.00.38-k"
system_hostname = ""
tgtid_bind_type = "wwpn (World Wide Port Name)"
uevent =
vport_create = <store method only>
vport_delete = <store method only>
Device = "host0"
Device path = "/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/host0"
fw_dump =
issue_logo = <store method only>
nvram = "ISP "
optrom_ctl = <store method only>
optrom =
reset = <store method only>
sfp = ""
uevent = "DEVTYPE=scsi_host"
vpd = "▒^"
Class Device = "host5"
Class Device path = "/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.1/host5/fc_host/host5"
dev_loss_tmo = "30"
fabric_name = "0x5005076802e5f62e"
issue_lip = <store method only>
max_npiv_vports = "127"
node_name = "0x2001001b32a787bc"
npiv_vports_inuse = "0"
port_id = "0xab0200"
port_name = "0x2101001b32a787bc"
port_state = "Online"
port_type = "NPort (fabric via point-to-point)"
speed = "4 Gbit"
supported_classes = "Class 3"
supported_speeds = "1 Gbit, 2 Gbit, 4 Gbit"
symbolic_name = "QLE2462 FW:v8.03.00 DVR:v8.07.00.38-k"
system_hostname = ""
tgtid_bind_type = "wwpn (World Wide Port Name)"
uevent =
vport_create = <store method only>
vport_delete = <store method only>
Device = "host5"
Device path = "/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.1/host5"
fw_dump =
issue_logo = <store method only>
nvram = "ISP "
optrom_ctl = <store method only>
optrom =
reset = <store method only>
sfp = ""
uevent = "DEVTYPE=scsi_host"
vpd = "▒^"
Trouver les WWN des cartes FC sur les serveurs
root@1:~# for i in 0 1 2 3 4 5; do cat /sys/class/scsi_host/host$i/device/fc_host/host$i/port_name; done 0x2100001b328555da 0x2101001b32a555da
root@2:~# for i in 0 1 2 3 4 5; do cat /sys/class/scsi_host/host$i/device/fc_host/host$i/port_name; done 0x2100001b328787bc 0x2101001b32a787bc
Avant le mapping
root@britt:~# lsscsi [6:0:0:0] disk USB TO I DE/SATA Device 0009 /dev/sda [7:0:0:0] disk SEAGATE ST31000424SS 0005 - [7:0:1:0] disk SEAGATE ST31000424SS 0005 - [7:1:2:0] disk LSILOGIC Logical Volume 3000 /dev/sdb
Rescanner les cartes FC
root@britt:~# echo "- - -" > /sys/class/scsi_host/host0/scan root@britt:~# echo "- - -" > /sys/class/scsi_host/host5/scan
Après le mapping
root@britt:~# lsscsi [5:0:0:10] disk IBM 2145 0000 /dev/sdc [5:0:0:20] disk IBM 2145 0000 /dev/sdd [6:0:0:0] disk USB TO I DE/SATA Device 0009 /dev/sda [7:0:0:0] disk SEAGATE ST31000424SS 0005 - [7:0:1:0] disk SEAGATE ST31000424SS 0005 - [7:1:2:0] disk LSILOGIC Logical Volume 3000 /dev/sdb
Trouver les cartes contrôleurs réseaux sur les serveurs
root@:~# lspci | grep -i eth 01:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01) 01:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01) 05:00.0 Ethernet controller: Broadcom Limited NetXtreme BCM5719 Gigabit Ethernet PCIe (rev 01) 05:00.1 Ethernet controller: Broadcom Limited NetXtreme BCM5719 Gigabit Ethernet PCIe (rev 01) 05:00.2 Ethernet controller: Broadcom Limited NetXtreme BCM5719 Gigabit Ethernet PCIe (rev 01) 05:00.3 Ethernet controller: Broadcom Limited NetXtreme BCM5719 Gigabit Ethernet PCIe (rev 01)
Trouver les @MAC des cartes réseaux sur les serveurs
root@:~# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp5s0f0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:0a:f7:13:12:84 brd ff:ff:ff:ff:ff:ff
3: enp1s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 00:a0:d1:ec:fc:60 brd ff:ff:ff:ff:ff:ff
4: enp5s0f1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:0a:f7:13:12:85 brd ff:ff:ff:ff:ff:ff
5: enp5s0f2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:0a:f7:13:12:86 brd ff:ff:ff:ff:ff:ff
6: enp1s0f1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:a0:d1:ec:fc:61 brd ff:ff:ff:ff:ff:ff
7: enp5s0f3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:0a:f7:13:12:87 brd ff:ff:ff:ff:ff:ff
projets/backup2017/configserveur.1521022395.txt.gz · Dernière modification : 2018/03/14 10:13 de tonio